Turck Magnetic Encoders with SAE J1939 Communication

Turck Magnetic Encoders with SAE J1939 Communication

Get improved diagnostics with Turck’s new magnetic encoder with an SAE J1939 communication interface. The J1939 protocol is based on Controller Area Network (CAN). It provides serial data communications between microprocessor systems for mobile vehicles and in intralogistics. Two interlocking bearings ensure a robust mechanical design and offer protection from vibration or shock on the shaft. It is ideal for use in mobile equipment applications such as rotational monitoring feedback, boom angle position and steering feedback. Available in Turck’s IP67-rated Industrial Line and IP64-rated Efficiency Line as 14-bit single or 29-bit multiturn encoders in 36 or 58 mm sizes.

Key Features & Benefits

  1. Configurations via SAE J1939 for Mobile Equipment


Single-turn:  14 bit scalable (default 14 bits)

Multi-turn:  29 bit scalable (default 14 single, 14 multi-turn)

b)Velocity feedback:  4000 RPM max.

c)250kbit/s Baud Rate

d)Predefined PG’s for position, speed and alarms

2.Wide Temperature range: Efficiency line from  -20…to +70°C and Industrial line from  -40…to +85°C

3.Protection ratings: Efficiency line is IP64 and Industrial line is IP67 with possibilities up to IP69K

Key Applications & Industries

  • Mobile equipment
  • Steering control
  • Turret feedback
  • Anywhere rotational position feedback is needed